Product Introduction

Turbo blower, by the air bearings, engine base, permanent magnet synchronous motor, frequency conversion controller, self cooling system composition, and is equipped with air filtration equipment and vent valve silencer. Due to the air suspension bearing technology, blower bearing friction and vibration, heat dissipating capacity is small, below 80 decibel noise, therefore, no set of lubricating oil device and gas, oil and water in the pipe system, also need not set up special sound equipment.

Air Bearing  

- No need any oil

- No Vibration

- Low noise (75db-80db)

- No maintenance （just need to change the strainer）

High efficiency frequency converter and (BLDC) permanent magnet brushless dc motor.  

- Reduce electricity bills by 30-50% compared to the roots blower.

- Cut the electricity bill by 20% compared with the original centrifugal blower.

- Semi-permanent life span

Adopt high efficiency stainless steel 630 impeller.  

- Impeller life span can keep 30 years

- Impeller efficiency can catch 92%

Product Feature

1. High efficiency and significant energy saving.

      The high efficiency impeller and the super high speed motor adopt the direct connection of the air bearing to remove the gear box and lubrication system, without mechanical contact, no vibration, low noise, no need for sound insulation.

       Using BLDC motor and variable frequency speed control system, adjust the speed control flow and pressure, and maintain high efficiency in the range of working flow of the fan.

2. Save space and reduce investment in ancillary facilities.

       The smallest wind machine room area; The equipment has light weight, simple foundation construction and no lifting device for installation. At the same time, you can choose the convenient arrangement mode according to the need, such as blowing the blower room directly on the aeration pool, saving the pipeline investment and reducing the loss of pipe resistance.

3. Simple operation and high degree of automation.

      The fan itself conducts self-check on the speed, pressure, temperature and flow rate, which can prevent the surge function, and can realize unmanned operation. In the working area of the fan, the output of wind volume and wind pressure is adjusted freely according to the external control signal.

       No local control cabinet and soft starter cabinet are required; The fan itself integrates the local control system; The main control panel set up by the wind machine room can automatically adjust the pressure, flow, control opening and problem alarm automatically through the computer CP U, so as to realize single and multiple simultaneous automatic control operation. The same time can be controlled by the remote central control room.

      The relevant technical personnel through the simple training, according to the procedure of the operation manual, the fan can be automatically put into operation and realize unmanned operation.

4. High reliability of equipment.

      Using two leading technology technologies, ultra-high speed (BLDC) motor, and HAFB (Hydro Dynamic Air Foil Bearing) dynamic pressure Air Bearing technology (removal due to gearbox, oil road lubrication system, complicated control system failure);The key parts are selected with excellent materials (the impeller adopts the SUS630 high strength stainless steel and the axial titanium metal material);Through standardized production, ensure the equipment performance is stable and excellent, high reliability.